AEG washing machine: error E35
Code E35 on a AEG washing machine display means: too much water in the washing machine.
- Meaning
- Too much water in the washing machine
- Check first
- Drain the water through the drain pump filter. Get a bowl and towels ready.
- Repair shop
- 410–1000 zł
Most common causes
- Damaged water valve
- Damaged level sensor
What you can check yourself
Turn off the water and unplug the washing machine.
Drain the water through the drain pump filter. Get a bowl and towels ready.
Turn the water on and run a short program. If water keeps flowing in non-stop, the water valve or level sensor needs repair service.
- the error keeps coming back after these checks,
- water is leaking or you smell burning,
- the appliance trips the circuit breaker.
More detail in our guide: Washing machine won't turn on →
Is it worth repairing?
Pick your model and fault. We compare the repair cost with what the appliance is worth.
Open the calculator →Questions
What does error E35 mean on a AEG washing machine?
Code E35 means: too much water in the washing machine. The most common causes: damaged water valve, damaged level sensor.
Can I keep using the washing machine with error E35?
If the error goes away after the checks above, yes. If it keeps coming back, water leaks, you smell burning or the breaker trips, stop using it and call a repair service.
Other codes: AEG washing machine
- E10 / E11water filling problem
- E20 / E21water draining problem
- E30water level sensor fault
- E40door lock problem
- E50motor fault
- E60water heating problem
- EF0leak, excess foam or unbalanced laundry
- EH0power supply problem
- E13water leak detected (Aqua Control system)
- E31water level sensor fault
- E33the water level protection was triggered
- E41 / E42door is not closed properly
A code can mean different things on different models and years. Always check the manual or the manufacturer's support page too. Repair prices are approximate, for repair shops in Poland.