AEG washing machine: error E10E11
Code E10 / E11 on a AEG washing machine display means: water filling problem.
- Meaning
- Water filling problem
- Check first
- Check that the water tap is fully open.
- Repair shop
- 0–340 zł
Most common causes
- Closed tap
- Kinked inlet hose
- Clogged filter screen
- Low water pressure
What you can check yourself
Check that the water tap is fully open.
Check that the inlet hose is not kinked or squashed.
Turn off the water, unscrew the hose at the appliance and clean the screen in the connector (for example with a toothbrush).
Check that other taps have normal water pressure.
- the error keeps coming back after these checks,
- water is leaking or you smell burning,
- the appliance trips the circuit breaker.
Is it worth repairing?
Pick your model and fault. We compare the repair cost with what the appliance is worth.
Open the calculator →Questions
What does error E10 mean on a AEG washing machine?
Code E10 / E11 means: water filling problem. The most common causes: closed tap, kinked inlet hose, clogged filter screen.
Can I keep using the washing machine with error E10?
If the error goes away after the checks above, yes. If it keeps coming back, water leaks, you smell burning or the breaker trips, stop using it and call a repair service.
Other codes: AEG washing machine
- E20 / E21water draining problem
- E30water level sensor fault
- E40door lock problem
- E50motor fault
- E60water heating problem
- EF0leak, excess foam or unbalanced laundry
- EH0power supply problem
- E13water leak detected (Aqua Control system)
- E31water level sensor fault
- E33the water level protection was triggered
- E35too much water in the washing machine
- E41 / E42door is not closed properly
A code can mean different things on different models and years. Always check the manual or the manufacturer's support page too. Repair prices are approximate, for repair shops in Poland.