NaprawometrRepair calculator →
EN

AEG washing machine: error E13

Code E13 on a AEG washing machine display means: water leak detected (Aqua Control system).

In short
Meaning
Water leak detected (Aqua Control system)
Check first
Check that the drain pump filter is screwed in tight and that the hoses and door seal are not leaking.
Repair shop
140–440 zł

Most common causes

What you can check yourself

  1. Turn off the water and unplug the washing machine.

  2. Check that the drain pump filter is screwed in tight and that the hoses and door seal are not leaking.

  3. Don't use too much detergent. Excess foam also causes this error.

  4. Wait until the base dries, then run a short program and watch where the water comes from.

Call a repair service if
  • the error keeps coming back after these checks,
  • water is leaking or you smell burning,
  • the appliance trips the circuit breaker.

More detail in our guide: Washing machine leaking →

Is it worth repairing?

Pick your model and fault. We compare the repair cost with what the appliance is worth.

Open the calculator →

Questions

What does error E13 mean on a AEG washing machine?

Code E13 means: water leak detected (Aqua Control system). The most common causes: water in the washing machine base, leaking hose or drain pump filter, too much foam.

Can I keep using the washing machine with error E13?

If the error goes away after the checks above, yes. If it keeps coming back, water leaks, you smell burning or the breaker trips, stop using it and call a repair service.

Other codes: AEG washing machine

A code can mean different things on different models and years. Always check the manual or the manufacturer's support page too. Repair prices are approximate, for repair shops in Poland.