Siemens dishwasher: error E25
Code E25 on a Siemens dishwasher display means: blocked drain pump.
- Meaning
- Blocked drain pump
- Check first
- Take out the filter, then remove the pump cover underneath it (often snap-on).
- Repair shop
- 200–480 zł
Most common causes
- Glass, a pit or a label in the pump
- Clogged filter
What you can check yourself
Turn off the dishwasher and scoop the water out of the bottom.
Take out the filter, then remove the pump cover underneath it (often snap-on).
Remove glass, pits or labels from the impeller. Be careful with sharp fragments.
Put everything back together and start the drain cycle.
- the error keeps coming back after these checks,
- water is leaking or you smell burning,
- the appliance trips the circuit breaker.
More detail in our guide: Dishwasher not draining →
Is it worth repairing?
Pick your model and fault. We compare the repair cost with what the appliance is worth.
Open the calculator →Questions
What does error E25 mean on a Siemens dishwasher?
Code E25 means: blocked drain pump. The most common causes: glass, a pit or a label in the pump, clogged filter.
Can I keep using the dishwasher with error E25?
If the error goes away after the checks above, yes. If it keeps coming back, water leaks, you smell burning or the breaker trips, stop using it and call a repair service.
Other codes: Siemens dishwasher
- E15water in the dishwasher base (Aquastop)
- E24drain problem: clogged filter or hose
- E22clogged filter
- E09water heating problem
- E14 / E17water supply problem
- E27 / E90supply voltage problem
- E01 / E02 / E03 / E04 / E05electronics or control module fault
- E06 / E8000door sensor fault
- E12limescale in the heating pump or too little salt
- E16 / E18 / E32water supply problem
- E20 / E21heating pump blocked or heater fault
- E23drain pump problem
A code can mean different things on different models and years. Always check the manual or the manufacturer's support page too. Repair prices are approximate, for repair shops in Poland.