Siemens dishwasher: error E01E02E03E04E05
Code E01 / E02 / E03 / E04 / E05 on a Siemens dishwasher display means: electronics or control module fault.
- Meaning
- Electronics or control module fault
- Check first
- Turn it on and run a short program.
- Repair shop
- 410–950 zł
Most common causes
- Heat pump system or board relay fault
- Heating self-test error
- Water diverter valve fault
What you can check yourself
Disconnect the dishwasher from power (plug or circuit breaker) for 10 minutes.
Turn it on and run a short program.
If the error comes back, report it to a repair service and give them this code and the model number from the plate in the door.
- the error keeps coming back after these checks,
- water is leaking or you smell burning,
- the appliance trips the circuit breaker.
Is it worth repairing?
Pick your model and fault. We compare the repair cost with what the appliance is worth.
Open the calculator →Questions
What does error E01 mean on a Siemens dishwasher?
Code E01 / E02 / E03 / E04 / E05 means: electronics or control module fault. The most common causes: heat pump system or board relay fault, heating self-test error, water diverter valve fault.
Can I keep using the dishwasher with error E01?
If the error goes away after the checks above, yes. If it keeps coming back, water leaks, you smell burning or the breaker trips, stop using it and call a repair service.
Other codes: Siemens dishwasher
- E15water in the dishwasher base (Aquastop)
- E24drain problem: clogged filter or hose
- E25blocked drain pump
- E22clogged filter
- E09water heating problem
- E14 / E17water supply problem
- E27 / E90supply voltage problem
- E06 / E8000door sensor fault
- E12limescale in the heating pump or too little salt
- E16 / E18 / E32water supply problem
- E20 / E21heating pump blocked or heater fault
- E23drain pump problem
A code can mean different things on different models and years. Always check the manual or the manufacturer's support page too. Repair prices are approximate, for repair shops in Poland.