Whirlpool dishwasher: error F6E6F7
Code F6 / E6 / F7 on a Whirlpool dishwasher display means: no water or water flow too slow.
- Meaning
- No water or water flow too slow
- Check first
- Check that the water tap is fully open.
- Repair shop
- 0–340 zł
Most common causes
- Closed tap
- Kinked or blocked hose
- Clogged flow meter or valve
What you can check yourself
Check that the water tap is fully open.
Check that the inlet hose is not kinked or squashed.
Turn off the water, unscrew the hose at the appliance and clean the screen in the connector (for example with a toothbrush).
Check that other taps have normal water pressure.
- the error keeps coming back after these checks,
- water is leaking or you smell burning,
- the appliance trips the circuit breaker.
Is it worth repairing?
Pick your model and fault. We compare the repair cost with what the appliance is worth.
Open the calculator →Questions
What does error F6 mean on a Whirlpool dishwasher?
Code F6 / E6 / F7 means: no water or water flow too slow. The most common causes: closed tap, kinked or blocked hose, clogged flow meter or valve.
Can I keep using the dishwasher with error F6?
If the error goes away after the checks above, yes. If it keeps coming back, water leaks, you smell burning or the breaker trips, stop using it and call a repair service.
Other codes: Whirlpool dishwasher
- F1temperature sensor fault or water at the wrong temperature
- F2 / E2water leak detected
- F3the dishwasher does not heat the water or heats it too slowly
- F4water draining problem
- F5wash pump impeller blocked
- F8 / F9too much water or the inlet valve does not close
A code can mean different things on different models and years. Always check the manual or the manufacturer's support page too. Repair prices are approximate, for repair shops in Poland.