Siemens tumble dryer: error E63
Code E63 on a Siemens tumble dryer display means: heating element fault.
- Meaning
- Heating element fault
- Check first
- Clean the filters and the heat exchanger, because blocked airflow overheats the sensor.
- Repair shop
- 270–680 zł
Most common causes
- Damaged heating element or thermal fuse
- Clogged filters
What you can check yourself
Unplug the tumble dryer for 5 minutes.
Clean the filters and the heat exchanger, because blocked airflow overheats the sensor.
Run a short cycle. If the error comes back, the temperature sensor needs repair.
- the error keeps coming back after these checks,
- water is leaking or you smell burning,
- the appliance trips the circuit breaker.
More detail in our guide: Tumble dryer not drying →
Is it worth repairing?
Pick your model and fault. We compare the repair cost with what the appliance is worth.
Open the calculator →Questions
What does error E63 mean on a Siemens tumble dryer?
Code E63 means: heating element fault. The most common causes: damaged heating element or thermal fuse, clogged filters.
Can I keep using the tumble dryer with error E63?
If the error goes away after the checks above, yes. If it keeps coming back, water leaks, you smell burning or the breaker trips, stop using it and call a repair service.
Other codes: Siemens tumble dryer
- E01 / E02clogged lint filter
- E03blocked or kinked condensate drain hose
- E06heating circuit fault
- E08 / E09 / E24 / E25 / E28 / E90electronics fault
- E04the dryer is overloaded
- E16 / DRthe door is open or not closed properly during drying
- E56humidity sensor fault
A code can mean different things on different models and years. Always check the manual or the manufacturer's support page too. Repair prices are approximate, for repair shops in Poland.