Electrolux tumble dryer: error E60
Code E60 on a Electrolux tumble dryer display means: the dryer does not heat properly.
- Meaning
- The dryer does not heat properly
- Check first
- Take out and clean the lint filter in the door. If it is coated, wash it under warm water and dry it thoroughly.
- Repair shop
- 270–680 zł
Most common causes
- Dirty filters or heat exchanger
- Damaged heating element or temperature sensor
What you can check yourself
Take out and clean the lint filter in the door. If it is coated, wash it under warm water and dry it thoroughly.
Clean the second filter by the heat exchanger (the flap at the bottom front) and rinse the heat exchanger if the manual allows it.
Use less fabric softener, because its residue clogs the filters.
Run the tumble dryer again.
- the error keeps coming back after these checks,
- water is leaking or you smell burning,
- the appliance trips the circuit breaker.
More detail in our guide: Tumble dryer not drying →
Is it worth repairing?
Pick your model and fault. We compare the repair cost with what the appliance is worth.
Open the calculator →Questions
What does error E60 mean on a Electrolux tumble dryer?
Code E60 means: the dryer does not heat properly. The most common causes: dirty filters or heat exchanger, damaged heating element or temperature sensor.
Can I keep using the tumble dryer with error E60?
If the error goes away after the checks above, yes. If it keeps coming back, water leaks, you smell burning or the breaker trips, stop using it and call a repair service.
Other codes: Electrolux tumble dryer
- C2 / E20condensate drain problem
- C6 / C8humidity or temperature sensor fault
- CD / E40the door does not close properly
- EH0 / EHOthe dryer gets no power
A code can mean different things on different models and years. Always check the manual or the manufacturer's support page too. Repair prices are approximate, for repair shops in Poland.