Beko dishwasher: error E02H02
Code E02 / H02 on a Beko dishwasher display means: no water or water flow too low.
- Meaning
- No water or water flow too low
- Check first
- Check that the water tap is fully open.
- Repair shop
- 0–340 zł
Most common causes
- Closed tap
- Clogged screen in the hose
- Kinked hose
- Low water pressure
What you can check yourself
Check that the water tap is fully open.
Check that the inlet hose is not kinked or squashed.
Turn off the water, unscrew the hose at the appliance and clean the screen in the connector (for example with a toothbrush).
Check that other taps have normal water pressure.
- the error keeps coming back after these checks,
- water is leaking or you smell burning,
- the appliance trips the circuit breaker.
Is it worth repairing?
Pick your model and fault. We compare the repair cost with what the appliance is worth.
Open the calculator →Questions
What does error E02 mean on a Beko dishwasher?
Code E02 / H02 means: no water or water flow too low. The most common causes: closed tap, clogged screen in the hose, kinked hose.
Can I keep using the dishwasher with error E02?
If the error goes away after the checks above, yes. If it keeps coming back, water leaks, you smell burning or the breaker trips, stop using it and call a repair service.
Other codes: Beko dishwasher
- E01 / H01dishwasher is not draining water
- E03 / H03leak detected (AquaSafe system)
- E04 / H04water heating problem
- E05 / E06 / E07 / E08electronics fault or a part that needs repair
A code can mean different things on different models and years. Always check the manual or the manufacturer's support page too. Repair prices are approximate, for repair shops in Poland.