Beko washing machine: error E13
Code E13 on a Beko washing machine display means: water leak detected.
- Meaning
- Water leak detected
- Check first
- Check that the drain pump filter is screwed in tight and that the hoses and door seal are not leaking.
- Repair shop
- 140–440 zł
Most common causes
- Leak in the base
- Leaking hose
What you can check yourself
Turn off the water and unplug the washing machine.
Check that the drain pump filter is screwed in tight and that the hoses and door seal are not leaking.
Don't use too much detergent. Excess foam also causes this error.
Wait until the base dries, then run a short program and watch where the water comes from.
- the error keeps coming back after these checks,
- water is leaking or you smell burning,
- the appliance trips the circuit breaker.
More detail in our guide: Washing machine leaking →
Is it worth repairing?
Pick your model and fault. We compare the repair cost with what the appliance is worth.
Open the calculator →Questions
What does error E13 mean on a Beko washing machine?
Code E13 means: water leak detected. The most common causes: leak in the base, leaking hose.
Can I keep using the washing machine with error E13?
If the error goes away after the checks above, yes. If it keeps coming back, water leaks, you smell burning or the breaker trips, stop using it and call a repair service.
Other codes: Beko washing machine
- E01door lock fault
- E02water heating problem
- E03water draining problem
- E04water filling problem
- E05water level sensor fault
- E06temperature sensor fault
- E07 / E08motor or speed sensor fault
A code can mean different things on different models and years. Always check the manual or the manufacturer's support page too. Repair prices are approximate, for repair shops in Poland.