AEG dishwasher: error i10i11
Code i10 / i11 on a AEG dishwasher display means: water supply problem.
- Meaning
- Water supply problem
- Check first
- Check that the water tap is fully open.
- Repair shop
- 0–340 zł
Most common causes
- Closed tap
- Kinked hose
- Clogged filter screen
- Low pressure
What you can check yourself
Check that the water tap is fully open.
Check that the inlet hose is not kinked or squashed.
Turn off the water, unscrew the hose at the appliance and clean the screen in the connector (for example with a toothbrush).
Check that other taps have normal water pressure.
- the error keeps coming back after these checks,
- water is leaking or you smell burning,
- the appliance trips the circuit breaker.
Is it worth repairing?
Pick your model and fault. We compare the repair cost with what the appliance is worth.
Open the calculator →Questions
What does error i10 mean on a AEG dishwasher?
Code i10 / i11 means: water supply problem. The most common causes: closed tap, kinked hose, clogged filter screen.
Can I keep using the dishwasher with error i10?
If the error goes away after the checks above, yes. If it keeps coming back, water leaks, you smell burning or the breaker trips, stop using it and call a repair service.
Other codes: AEG dishwasher
- i20water draining problem
- i30leak detected (flood protection)
- i50problem with the wash pump or water circulation
- i60water heating problem
- i40 / i41 / i43 / i44water level measurement problem
- i51 / i52 / i53 / i54 / i55 / i56 / i57 / i58 / i59 / i5A / i5B / i5C / i5D / i5E / i5Fwash pump motor or motor power fault
- i61 / i69 / i6Cheating or temperature sensor problem
- iF0 / iF1water level too high
- iA0leak protection triggered (water in the base)
- iC0 / iC3 / i70 / i80 / i90electronics fault or a part that needs repair
A code can mean different things on different models and years. Always check the manual or the manufacturer's support page too. Repair prices are approximate, for repair shops in Poland.